|
Storz is a type of hose coupling invented by Carl August Guido Storz in 1882 that connects using interlocking hooks and flanges. Amongst other uses, it has been widely employed on fire hoses in firefighting applications. It is the standard coupling on fire hoses in Portugal, Denmark, Germany, Austria, Switzerland, Sweden, the Netherlands and Greece.〔T.O.T.E.E. 2451/86 ''Εγκαταστάσεις σε κτήρια: Μόνιμα πυροσβεστικά συστήματα με νερό'', Technical Chamber of Greece, 1986, pp. 12, 15, 20.〕 It is also widely used in Australia. Storz connectors are usually made of brass or aluminium. They can be manufactured by casting for general hose connection and low pressure applications, but for firefighting, it is better to use forgings to guarantee the safety and durability of the coupling. It is sometimes referred to as a sexless coupling, because rather than having a male and a female end connected by screw threads, either identical end can be joined to any other end of the same diameter. This is also called hermaphroditic or two-way connection. To couple a Storz connection, the two opposing couplings are pressed together such that the hooks of each one are inserted into the slots in the flange of the other. Then they are rotated in opposite directions until they are tight, or latches engage. This creates a water-tight connection between the internal packing gaskets. To uncouple them, the latches are released and the connectors are turned in the opposite directions from coupling, and then separated when the hooks and slots are aligned. Special wrenches are designed for assisting with use of Storz connectors. The main benefit to using Storz couplings is speed of hose connection, as a hose can be locked with a quarter-turn. By comparison, locking hoses using threaded couplings often takes several turns. Because of this, Storz couplings are widely viewed as a safer alternative to using threaded couplings. Guido Storz patented his coupling in Switzerland in 1890, and it soon became a standard for fire hydrants throughout much of Europe — but it took nearly one hundred years before the main larger "steamer ports" on fire hydrants started to be converted to the Storz coupling in the United States. U.S. fire engines typically carry LDH (large diameter hose) with Storz couplings on both ends for connections between fire hydrants and pumps. However, if a hydrant usually has threaded couplings, an adapter is required to use with Storz. All major U.S. hydrant manufacturers now offer Storz couplings as original equipment on their hydrants, to connect with the Storz couplings used by firefighters. Hydrants may also be retro-fitted from thread to Storz to aid interoperability between firefighting organizations. File:Schlauchverteiler Feuerwehr.jpg|Two 3-way splitters with Storz connectors. File:2008-07-05_Fire_hose_connection.jpg|Building dry riser fire hose connection File:Firehose75mm.jpg|75 mm fire hose with Storz couplings File:storz_hydrant_converter.jpg|Threaded to Storz adapter for fire hydrants. == See also == * Bayonet mount 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Storz」の詳細全文を読む スポンサード リンク
|